ZyXEL Communications 1001H manual System Status, System Maintenance Status Menu Fields

P100IH ISDN Router

11.1 System Status

The first selection, System Status, gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ISDN telephone line status, number of packets sent and number of packets received.

To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status. There are five commands in Menu 24.1 - System Maintenance - Status. Entering 1 disconnects the current B1 channel call; 2 disconnects the current B2 channel call, 3 resets the counters, 4 drops both B1 and B2 and ESC takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

		Menu 24.1 -- System Maintenance – Status
Chan	Link	Type	TXPkts	RXPkts	Errors	CLU	ALU	Up Time
--	Down	0Kbps	0	0	0	0%	0%	0:00:00
--	Down	0Kbps	0	0	0	0%	0%	0:00:00

Total Outcall Time:	0:00:00
Ethernet:	WAN:
Status: 10M/Half Duplex	Chan 1 IP Addr:
TX Pkts: 230	Chan 2 IP Addr:
RX Pkts: 0	Chan 1 CLID:
Collisions: 0	Chan 2 CLID:
LAN Packet Which Triggered Last Call:
	Press Command:
COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All		ESC-Exit

Figure 11-2 Menu 24.1 - System Maintenance – Status

The following table describes the fields present in Menu 24.1 - System Maintenance - Status.

		Table 11-1 System Maintenance - Status Menu Fields
	Field		Description
	Chan		Shows statistics for B1 and B2 channels respectively. This is the
			information displayed for each channel:
	Link		Shows the name of the remote node or the user the channel is
			currently connected to or the status of the channel (Down, Idle,
			Calling or Answering).
11-2			System Maintenance