P100IH ISDN Router
5.1.7Remote Node Filter
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige and to prevent certain packets from triggering calls. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field.
Note that spaces are accepted in this field. For more information on defining the filters, see Chapter 9: . The Prestige comes with a prepackaged filter set, NetBIOS_WAN, that blocks NetBIOS packets (call protocol filter = 1). You can include this in the call filter sets if you wish to prevent NetBIOS packets from triggering calls to a remote node.
Menu 11.5 - Remote Node Filter
Input Filter Sets: protocol filters=
device filters= Output Filter Sets: protocol filters= device filters=
Call Filter Sets: protocol filters= 1
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Figure 5-4 Menu 11.5 – Remote Node Filter
Remote Node Configuration |
