ZyXEL Communications 1001H manual Dial-In Users Setup, Default Dial-in Filter

P100IH ISDN Router

but not the remote nodes. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field. The default is no filters.

Spaces are accepted in this field. For more information on defining the filters, see Chapter 9: .

Menu 13.1 - Default Dial-in Filter

Input Filter Sets: protocol filters=

device filters= Output Filter Sets: protocol filters= device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-4 Default Dial-in Filter

7.3Dial-In Users Setup

The following steps describe the setup procedure for setting up a remote dial-in user.

Step 1. From the Main Menu, enter option 14 to go to Menu 14 - Dial-in User Setup, as shown in the next figure.

Dial-In Server Configuration 7-7