ZyXEL Communications 1001H manual NAT Example

P100IH ISDN Router

Figure 4-19 NAT - Example 3

In this case we need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore we must choose the Full Feature option from the Network Address Translation field in Menu 4 or Menu 11.3 and select an available NAT Server Set, say Server Set 2, that we configure later.

Step 1. Enter 15 from the Main Menu.

Step 2. Enter 1 to configure the Address Mapping Sets.

Step 3. Choose 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then select 1 from Select Rule field. Press [ENTER] to confirm.

Step 4. Select Type= as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). (See Figure 4-20)

Step 5. Repeat the previous step for rules 2 to 4 as outlined above.

Step 6. When finished, Menu 15.1.1 should look like as shown in Figure 4-21.

The following figure shows how to configure the first rule.

4-18 NAT