
P100IH ISDN Router
Follow the instructions in the following table on how to configure the DHCP fields.
Field
Table 3-1 DHCP Ethernet Setup Menu Fields
Description | Example |
|
|
DHCP Setup
DHCP=
Client IP Pool Starting Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS
Server
Relay Server
Address=
This field enables/disabled the DHCP server. If it is set to Server, your Prestige will act as a DHCP server. If set to None, DHCP server will be disabled. If the Prestige 100IH is set to Relay, it will act as a surrogate DHCP server where it relays IP address assignment from the actual real DHCP server to the clients.
When DHCP is used, the following four items need to be set:
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count, of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP clients along with the IP address and the subnet mask.
If you chose Relay in the DHCP= field above, then enter the IP of the actual DHCP server from which the Prestige will relay requests and responses here.
None
Server (default)
Relay
192.168.1.33
32
Internet Access |