Base Unit Settings
Ringer setup
Ringer volume
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Ringer Setup”, then press
,.
5Select “Ringer Volume”, then press
,.
6Press {e} or {v} repeatedly to select the desired volume.
7Press ,.
8Press {ih}.
Night mode
Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 21) and the base unit.
Set the date and time beforehand (page 12).
Setting the start and end time for night mode
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Ringer Setup”, then press
,.
5Select “Night Mode”, then press
,.
6Select “Start/End”, then press ,.
7Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.
LIf you use
8Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.
LIf you use
9Press ,.
10Press {ih}.
Turning night mode on/off
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Ringer Setup”, then press
,.
5Select “Night Mode”, then press
,.
6Select “On/Off”, then press ,.
7Select “On” or “Off”, then press ,.
8Press {ih}.
Setting the ring delay for night mode
This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring, useful when someone urgently needs to speak with you. If you select “No Ringing”, the base unit will not ring during night mode.
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
26
