LIf all registered handsets start ringing, press {x} to stop, then repeat this step.
LAfter pressing {x}, the rest of this procedure must be completed within 1 minute.
6Wait until “Enter Base PIN” is displayed, then enter “0000” (default base unit PIN), then press ,.
LIf you changed the PIN, enter it (page 28).
LWhen the handset has been registered successfully, w will stop flashing. If keytones are turned on (page 24), a confirmation tone will be heard.
Selecting a base unit
When “Auto” is selected, the handset will automatically use any available base unit it is registered to. When a specific base unit is selected, the handset will make and receive calls using that base unit only. If the handset is out of range of that base unit, no calls can be made.
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Select Base”, then press
,.
4Select the desired base unit number, or “Auto”, then press ,.
LThe handset starts searching for the base unit.
Cancelling a handset
A maximum of 6 handsets can be registered to a base unit. A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This will allow the base unit to “forget” the handset.
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Enter “335”.
5Select “Cancel Handset”, then press
,.
LThe numbers of all handsets registered to the base unit are displayed.
6Select the handset(s) you want to cancel, by pressing the desired handset number.
LThe selected handset number(s) will flash.
LTo cancel a selected handset number, press the number again. The number will stop flashing.
7Press ,.
8Select “Yes”, then press ,.
9Press {ih}.
Cancelling a base unit
A handset can be registered to a maximum of 4 base units. A handset can cancel a base unit that it is registered to. This allows the handset to “forget” the base unit.
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Registration”, then press
,.
4Enter “335”.
5Select “Cancel Base”, then press
,.
6Enter “0000” (default handset PIN).
LIf you changed the PIN, enter it (page 23).
7Select the base unit(s) you want to cancel, by pressing the desired base unit number.
LThe selected base unit number(s) will flash.
34
