Printer control panel
The PagePro 1350W has two LEDs that indicate the status of the printer.
Ready | Error | Printer condition |
Off | Off | Printer power off |
On | Off | Printer ready |
On | On | Initializing (or cancelling |
|
| job) |
Off | On | Printer cover open |
Blink | Blink | Communication error |
Off | Slow blink | Paper out |
Off | Blink | Paper jam |
Off | Rapid blink | Service call required |
Rapid blink | Rapid blink | Paper size error (or |
|
| waiting for manual |
|
| duplex) |
Blink | Off | Printing |
Rapid blink | Off | Warming up |
Slow blink | Off | Power save |
On | Slow blink | Toner cartridge low |
On | Blink | Toner cartridge empty |
On | Rapid blink | Incorrect toner cartridge |
|
| installed |
Cancel button
Press and hold the Cancel button for more than 5 seconds to cancel the current job. In the event of a paper mismatch error (a paper size requested by the job is not loaded in the printer) or when manually duplex printing (using the PagePro 1350W driver), press the Cancel button for less than 5 seconds after reloading paper in the printer.
Select duplex printing for
manually printing on both sides of the page. Use the Cancel button as directed.
15
