Panasonic KX-TG1850NZ operating instructions Setting call restriction

LIf you changed the PIN, enter it (page 28).

4 Select “Call Options”, then press ,.

5 Select “Call Restrict”, then press ,.

6 Set which handsets will be restricted by pressing the desired handset number.

LAll the registered handset numbers will be displayed.

LFlashing numbers indicate call restriction is turned on for the corresponding handset.

LTo turn call restriction off for a handset, press the number again. The number will stop flashing.

7 Press ,.

8 Select a memory location, then press ,.

LIf the memory location already contains a restricted number, the number is displayed.

9 Enter the phone number or area code to be restricted (8 digits max.), then press ,.

LTo erase a restricted number, press {C/T}.

10 Press {ih}.

Other options

Changing the base unit PIN (Personal Identification Number)

For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.

Select Z, then press ,.

Enter “0000” (default base unit PIN).

2

3

Base Unit Settings

codes which you want the unit to delete automatically.

Example: You have stored the area code “123”. If you make a call from the Caller ID list to the phone number “123-456-7890”, the unit dials “456-7890”.

1Press $(middle soft key).

2Select Z, then press ,.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

28).

4Select “Call Options”, then press

,.

5Select “ARS Settings”, then press

,.

6Select “Area Code”, then press ,.

7Select an area code location (1-4), then press ,.

LIf the location already contains an area code, the code is displayed.

8Enter an area code (5 digits max.), then press ,.

9Press {ih}.

Note:

LThe use of this feature can prevent a National Call from being dialled. E.g., in the case of the South Island, the “03” will be omitted and will therefore prevent a National Call to other areas of the South Island.

Setting call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display.

1Press $(middle soft key).

28