SMC Networks SMC7204BRA manual Setting the Dhcp Mode, Dynamic Host Configuration Protocol Dhcp

Configuring Dynamic Host Configuration Protocol

4.Select your WAN interface from the drop-down list and click [Add]. Your WAN interface may be named [ppp-0], [eoa-0], or [ipoa-0]. Contact your ISP if you are unsure which type of WAN interface you use.

Note: You can also delete an interface from the table by clicking in the right column.

5.Click [Submit]. A page appears to confirm your changes, and then the program returns to the [Dynamic Host Configuration Protocol (DHCP) Relay Configuration] page.

6.Follow the instructions in Setting the DHCP Mode to set the DHCP mode to DHCP Relay.

Setting the DHCP Mode

You must enable the appropriate DHCP mode to activate your DHCP relay or DHCP server settings.

Follow these instructions to set the DHCP mode:

1.Click the [LAN] tab, and then click [DHCP Mode] in the task bar. The [Dynamic Host Configuration Protocol (DHCP) Configuration] page appears.

Figure 15. Dynamic Host Configuration Protocol (DHCP)

Configuration Page

54