SMC Networks SMC7204BRA manual 124

Configuring IPoA Interfaces

2.Select the next available interface name from the [IPoA Interface:] drop-down list.

3.In the [Conf. IP Address:] and [Netmask:] fields, type the address and mask that what you want to assign to the IPoA interface.

4.From the [IPF Type:] drop-down list, select the level of firewall security for the interface ([Public], [Private] or [DMZ], see page 121 for definitions).

5.In the [IPoA Type:] field, click the [1577] radio button if the interface complies with the IETF specification RFC 1577. Otherwise click the [Non 1577] radio button, then click [Add].

6.If you want the IPoA interface to serve as the default route for your LAN, click the [Enable] radio button in the [Default Route:] field.

7.In the [Gateway IP Address:] field, enter the address of the Internet computer to contact to gain initial access to the Internet.

8.Select the Lower Interface from the [Lower Interface:] drop-down list.

9.Click [Add].

10.Click [Submit]. A [Confirmation] page will appear to confirm your changes.

11.Click [Close] to return to the [IP over ATM (IPoA) Configuration] page and view the new interface in the table.

12.Click the [Admin] tab. Click [Commit & Reboot] in the task bar.

13.Click [Commit] to save your changes to the permanent memory.

124