SMC Networks SMC7204BRA Bridge, As RFC 1483 or Ethernet over ATM, Configuration of your device

	Configuring the ADSL Barricade
Bridge:	You may select [Enabled] or [Disabled] to set the bridging between
	the ADSL Barricade and your ISP. Your ISP may also refer to this
	as RFC 1483 or Ethernet over ATM.
IGMP:	You may select [Enabled] or [Disabled] to set the Internet Group
	Management Protocol, which some ISPs use to perform remote
	configuration of your device.
IP Address:	If your ISP has assigned a public IP address to your LAN, enter the
Subnet Mask:	address and the associated subnet mask in the provided boxes.
	(Note: In some configurations, the public IP address should be
	entered on your PC rather than on the ADSL Barricade; please
	check with your ISP.)
	DNS
Primary DNS	Enter the Primary and Secondary DNS server addresses
Server:	provided by your ISP.
Secondary DNS
Server:
	PPP
Username:	Enter the Username and the Password you use to log in to your
Password:	ISP. (Note: This is not the same as the user name and password
	you have used to log in to Configuration Manager.)

3.When you have finished customizing these settings, click [Submit]. The settings are now effective. However, if you reboot or if the power is disconnected, your settings will be lost. In Step 4, you save the changes to the permanent memory.

4.Click the [Admin] tab that appears in the upper right corner of the page, and then click [Commit & Reboot] in the task bar.

5.Click [Commit]. A page will appear briefly to confirm your changes, and then you will be returned to the [Commit & Reboot] page.

You can click [Delete] to remove all existing [Quick Configuration] settings and return to the default values.

19