SMC Networks SMC7204BRA Configuring the ATM Virtual Circuit, Use an aal5-type interface, Vpi

Configuring the ATM Virtual Circuit

The ATM VC Configuration table displays the following fields (contact your ISP to determine these settings):

Field	Description
Interface	This field indicates the name of the lower-level interface on which
	this VC operates. The low-level interface names are preconfigured
	in the software and identify the type of traffic that can be
	supported, such as data or voice. Internet data services typically
	use an aal5-type interface.
Vpi	These settings identify a unique ATM data path for communication
Vci	between your ADSL Barricade and your ISP.
Mux Type
Max Proto	If you are using an AAL5-type of interface, this setting indicates
per AAL5	the number of higher-level interfaces that the VC can support
	(the higher level interfaces can be PPP, EoA, or IPoA interfaces).
	Contact your ISP to determine which connection protocol(s) they
	require.
Action (s)	This field displays the icons you can click on to modify ( — see
	page 94) and delete ( ) the associated interface. You cannot
	delete an ATM interface if another protocol such as PPP, EoA, or
	IPoA has been defined to operate over the ATM interface. Delete
	the higher-level interface first, and then delete the ATM interface.

100