SMC Networks SMC7204BRA Security, Low, then the rule will be inactive, Blacklist, Start Time

	Configuring IP Filters
Security	This is the security level that must be enabled globally for this rule
Level:	to take affect. A rule will be active only if its security level is the
	same as the globally configured setting (shown on the main
	[IP Filter Configuration] page). For example, if the rule is set to
	[Medium] and the global firewall level is set to [Medium], then the
	rule will be active; but if the global firewall level is set to [High] or
	[Low], then the rule will be inactive.
Blacklist	This field specifies whether or not a violation of this rule will result
Status:	in the offending computer'sIP address being added to the
	Blacklist, which blocks the ADSL Barricade from forwarding
	packets from that source for a specified period of time. See
	Configuring Firewall Settings on page 131 for instructions.
Log Tag:	This is a description of up to 16 characters to be recorded in the
	log in the event that a packet violates this rule. Be sure to set the
	[Log Option] to [Enable] if you configure a Log Tag.
Start Time	The time range during which this rule is to be effective, specified
(HH MM SS):	in military units.
End Time
(HH MM SS):

141