SMC Networks SMC7204BRA manual 120

Configuring EOA Interfaces

7.If your ISP will assign the IP address from their DHCP server, click the [Enable] radio button in the [Use Dhcp] field. When DHCP is set to [Enable], the address you entered in the [Conf. IP Address:] field will be requested from the DHCP server; the server may assign a different address

if necessary.

8.If you want the EOA interface to serve as the default route for Internet access for your LAN, click the [Enable] radio button in the [Default Route:] field.

9.In the [Gateway IP Address:] field, enter the address of the Internet computer to contact in order to gain initial access to the Internet.

10.Click [Submit]. A [Confirmation] page appears to confirm your changes.

11.Click [Close] to return to the [RFC1483/Ethernet over ATM (EOA) Config] page and view the new interface in the table.

12.Click the [Admin] tab, and then click [Commit & Reboot] in the task bar.

13.Click [Commit] to save your changes to the permanent memory.

120