SMC Networks SMC7204BRA manual Committing Changes and Rebooting

Committing Changes and Rebooting

You can commit changes to save them permanently to a flash memory.

Note: Submitting changes activates them immediately, but saves them only until the device is reset or powered down. Committing changes saves them permanently.

Follow these steps to commit changes.

1.Click the [Admin] tab, and then click [Commit & Reboot] in the task bar. The [Commit & Reboot] page appears.

Figure 6. Commit & Reboot Page

2.Click [Commit]. Disregard the selection in the [Reboot Mode:] drop-down list; it does not affect the commit process. These changes are saved to a permanent storage. The previous settings are copied to a backup storage so that they can

be recalled if your new settings do not work properly (see the below rebooting instructions).

Rebooting the device using Configuration Manager

To reboot the device, display the [Commit & Reboot] page, select the appropriate [Reboot Mode:] from the drop-down list, and then click [Reboot].

You have three options when rebooting.

31