Quick Start

Wall Jack

ADSL Barricade

AC adapter

To a hub: use cross-

over cable to uplinkor port or straight cable

to standard port

To a PC: use a cross-over cable

Hub/switch (for local area network)

Stand-alone computer

Networked Computers

Figure 1. Overview of Hardware Connections

Step 1. Connect the ADSL cable

Connect one end of the provided phone cable (RJ-11) to the port labeled ADSL on the Rear Panel of the device. Connect the other end to your wall phone jack.

You can attach a telephone line to the device. This is helpful when the ADSL line uses the only convenient wall phone jack. If desired, connect the telephone cable to the port labeled Phone.

Warning: Although you use the same type of cable, the ADSL and Phone ports are not interchangeable. Do not route the ADSL connection through the Phone port.

Note: ADSL splitters/microfilters are included with some models.

8

Page 14
Image 14
SMC Networks SMC7204BRA manual Quick Start, Connect the Adsl cable