SMC Networks SMC7204BRA manual NAT Rule Add Page Pass Flavor

Configuring Network Address Translation

The Pass rule: Allowing specific addresses to pass through untranslated

You can create a Pass rule to allow a range of IP addresses to remain untranslated when another rule would otherwise do so.

Figure 27. NAT Rule - Add Page (PASS Flavor)

The Pass rule must be assigned a rule ID that is a lower number than the ID assigned to the rule it is intended to pass. If you want a specific IP address or range of addresses not to be subject to an existing rule, say rule ID #5, then you can create a Pass rule with ID #1 through #4.

Follow these instructions to add a Pass rule (see steps 1-4 under The NAPT Rule on page 66 for detailed instructions corresponding to steps 1 and 2 below):

1.Display the [NAT Rule – Add Page], select [PASS] as the [Rule Flavor:], and enter a [Rule ID:].

2.Select the interface on which this rule will be effective.

78