SMC Networks SMC7204BRA manual Configuring the Adsl Barricades Interfaces with RIP

Configuring the ADSL Barricade's Interfaces with RIP

RIP version 2 is the preferred selection because it supports classless IP addresses (which are used to create subnets) and other features. Select [RIP2] if all other routing devices on the autonomous network support this version of the protocol.

6.Click [Add]. The new RIP entry will display in the table.

7.Click the [Enable] radio button to enable the RIP feature.

Note: If you disable the RIP feature, the interface settings you have configured will remain available for future activation.

8.When you are finished defining RIP interfaces, click [Submit]. A page appears to confirm your changes.

9.Click the [Admin] tab, and then click [Commit & Reboot] in the task bar.

10.Click [Commit] to save your changes to the permanent memory.

Note: You can delete an existing RIP entry by clicking in the [Action] column.

97