SMC Networks SMC7204BRA manual Rule to be invoked on packets containing, Any any source IP address

Configuring IP Filters and Blocked Protocols

Src IP	These fields indicate IP address criteria for the source
Address:	computer(s) (from which the packet originates) and the
Dest IP	destination computer. In the drop-down list, you can configure the
	rule to be invoked on packets containing:
Address:
	[any]: any source IP address.
	[lt]: any source IP address that is numerically less than the
	specified address.
	[lteq]: any source IP address that is numerically less than or equal
	to the specified address.
	[gt]: any source IP address that is numerically greater than the
	specified address.
	[eq]: any source IP address that is numerically equal to the
	specified address.
	[neq]: any source IP address that is not equal to the specified
	address.
	[range]: any source IP address that is within the specified range,
	inclusive.
	[out of range]: any source IP address that is outside the specified
	range.
	[self]: the IP address of the ADSL Barricade interface on which this
	rule takes effect.
	[bcast] (destination address only): specifies that the rule will be
	invoked for any packets sent to the broadcast address for the
	receiving interface. (The broadcast address is used to send packets
	to all hosts on the LAN or subnet connected to the specified
	interface.) When you select this option, you do not need to specify
	the address, so the address fields are dimmed.
Protocol:	This field indicates the basic IP protocol criteria that must be met
	for rule to be invoked. Using the options in the drop-down list, you
	can specify that packets must contain the selected protocol ([eq]),
	that they must not contain the specified protocol ([neq]), or that
	the rule can be invoked regardless of the protocol ([any]). [TCP],
	[UDP], and [ICMP] are commonly IP protocols; others can be
	identified by number from [0-255], as defined by the Internet
	Assigned Numbers Authority (IANA).

142