SMC Networks SMC7204BRA manual Adding IP Routes, IP Route-Add

Configuring IP Routes

Adding IP Routes

Follow these instructions to add an IP route to the routing table.

1.From the [IP Route Table] page, click [Add]. The [IP Route - Add] page appears, as shown in Figure 30.

Figure 30. IP Route-Add Page

2.Specify the Destination, Netmask, and Gateway or NextHop for this route. For a description of these fields, refer to the table on page 89. To create a route that defines the default gateway for your LAN, enter 0.0.0.0 in both the [Destination:] and [Netmask:] fields. Enter your ISP's IP address in the [Gateway/NextHop:] field.

Note: You cannot specify the interface name, route type or route origin. These parameters are used only for routes that are identified automatically as the device communicates with other routing devices. For routes you created, the routing table displays system default values in these fields.

90