SMC Networks SMC7204BRA manual Configuring the Adsl Barricade

Configuring the ADSL Barricade

Note: Your PCs must have IP addresses that place them

in the same subnet as the ADSL Barricade's LAN port. If you manually assign IP information to all your LAN PCs, you can follow the instructions in Configuring the LAN Ports to change the LAN port IP address accordingly.

Configuring the ADSL Barricade

This section provides you instructions on how to log into the program of the ADSL Barricade and how to configure basic settings for your Internet connection. Your ISP should provide you with the necessary information to complete this step.

Logging into the ADSL Barricade –

Quick Configuration Page

The ADSL Barricade provides a preinstalled software program called Configuration Manager which enables you to configure the operation of the device via your Web browser. The settings that you most likely need to change before using the device

are grouped onto one single [Quick Configuration] page.

Follow these instructions to configure the device settings.

1.At any PC connected to the ADSL Barricade via Ethernet, open your Web browser, and type the following URL in the address/ location box: 192.168.1.1/setup. Username/Password: smc/smcadmin.

2.When you press [Enter], the page shown in Figure 2 should appear (see section Troubleshooting on page 175, if you receive an error message or if the page does not appear).

17