SMC Networks SMC7204BRA Start IP Address, End IP Address, For distribution to your LAN computers

Configuring Dynamic Host Configuration Protocol

2.Click [Add]. The [DHCP Server Pool – Add] page appears, as shown in Figure 11:

Figure 11. DHCP Server Pool – Add Page

3.Enter values for the [Start IP Address:], [End IP Address:], and [Netmask:] fields, which are required, and any others as needed:

Field	Description
Start IP Address:	This field specifies the lowest and highest addresses in the pool,
End IP Address:	up to a maximum range of 254 addresses. For example, if the
	LAN port is assigned IP address 192.168.1.1, then you could
	create a pool with address range 192.168.1.2 – 192.168.1.254
	for distribution to your LAN computers.
Mac Address	A MAC address is a manufacturer-assigned hardware ID that
	is unique for each device on a network. Use this field only if you
	want to assign a specific IP address to the computer that uses
	this MAC address. If you type a MAC address here, you must
	have specified the same IP address in both the [Start IP
	Address:] and [End IP Address:] fields.

48