SMC Networks SMC7204BRA manual Configuring the Adsl Barricades Interfaces with RIP

Configuring the ADSL Barricade's Interfaces with RIP

1.Log into the Configuration Manager, click the [Services] tab, and then click [RIP] in the task bar. The [Routing Information Protocol (RIP) Configuration] page appears, as shown in Figure 31.

Figure 31. Routing Information Protocol (RIP)

Configuration Page

The page contains radio buttons for [Enable] or [Disable] the RIP feature and a table listing interfaces on which the protocol is currently running. The first time you open this page, the table may be empty.

2.If necessary, change the [Age (seconds):] and [Update Time (seconds):].

These are global settings for all interfaces that use RIP.

[Age (seconds):] is the amount of time in seconds that the device's RIP table will retain each route that it learns from adjacent computers.

[Update Time (seconds):] specifies how frequently the ADSL Barricade will send out its routing table to its neighbors.

95