LTo cancel a selected base unit number, press the number again. The number will stop flashing.
8Press ,.
9Select “Yes”, then press ,.
10Press {ih}.
Note:
LTo register the handset to another base unit or to the same base unit again, see manual registration (page 33).
Increasing the range of the base unit
You can increase the range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 5. Consult your Panasonic dealer for details.
Important:
LBefore registering the repeater to this base unit, you must turn the repeater mode on.
Turning the repeater mode on/off
1Press $(middle soft key).
2Select Z, then press ,.
3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
28).
4Select “Other Options”, then press
,.
5Select “Repeater Mode”, then press
,.
6Select “On” or “Off”, then press ,.
7Press {ih}.
Note:
LAfter turning repeater mode on/off, you will not be able to make or receive calls for a few moments.
Intercom between handsets
Example: When handset 1 calls handset 2
1Handset 1:
Press {INT} and {2} (desired handset number).
2Handset 2:
Press {C} or {s} to answer.
3When finished talking, press {ih}.
Note:
LIntercom calls can be made between handsets in the same radio cell, but not between handsets in different radio cells.
Transferring calls between handsets, conference calls
Outside calls can be transferred between 2 handsets in the same radio cell. 2 handsets in the same radio cell can have a conference call with an outside party.
Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT} and {2} (desired handset number).
LThe outside call will be put on hold.
LIf there is no answer, press {INT} to return to the outside call.
2Handset 2:
Press {C} or {s} to answer the page. LHandset 2 can talk with handset 1.
3Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
35
