Handset Settings
Selecting categories to bypass night mode
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Ringer Setup”, then press
,.
4Select “Night Mode”, then press
,.
5Select “Select Category”, then press ,.
6Press the desired category numbers, then press ,.
LThe selected category number will flash.
LTo cancel a selected category number, press the number again. The number will stop flashing.
7Press {ih}.
Note:
LIf a call is received from one of the categories set to bypass night mode, only the handset will ring.
Display setup
Selecting wallpaper
You can select the “wallpaper” shown on the display in standby mode from one of the preset patterns.
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Display Setup”, then press
,.
4Select “Wallpaper”, then press ,. LThe current wallpaper is displayed.
5Press {e} or {v} repeatedly to select the desired item, then press ,.
6Press {ih}.
Note:
LIf you select “Off”, the display colour will be changed to the colour you selected for display colour (page 22).
Selecting a display colour
You can select the desired display colour.
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Display Setup”, then press
,.
4Select “Display Colour”, then press
,.
5Select the desired colour, then press
,.
6Press {ih}.
Selecting the standby mode display
“Base Number”: The current base unit number is displayed.
“Handset Number”: The current handset number is displayed.
“Off”: Only the current date and time are displayed.
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Display Setup”, then press
,.
4Select “Standby Display”, then press ,.
5Select the desired setting, then press
,.
6Press {ih}.
Note:
LIf “Base Number” is selected and the current base unit number is 2,
LIf “Handset Number” is selected and the current handset number is 2, “[2]” is displayed.
22
