Preparation
Battery installation
1Insert the batteries negative (T) terminal first.
2Close the handset cover.
Note:
LUse only rechargeable batteries (page 5).
Battery charge
Place the handset on the base unit for about 7 hours before initial use.
When charging, i and battery strength icon are alternately shown on the display.
When the batteries are fully charged, 1 flashes.
Note:
LIt takes 7 hours to fully charge the batteries, however, you can use the handset before the batteries are fully charged.
LClean the charge contacts (page 7) of the handset and base unit with a soft, dry cloth once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust or high humidity.
Battery strength
Battery icon | Battery strength |
1High
2Medium
3Low
When flashing: Needs to be charged.
Note:
LWhen 3flashes, recharge the handset batteries. 3will continue to flash until the batteries have been charged for at least 15 minutes.
LIf the handset is turned off, it will be turned on automatically when it is placed on the base unit.
10
