Roland GI-20 owner manual Setting the driver, Installing & Setting Up the Driver Macintosh

Installing & Setting Up the Driver (Macintosh)

4.Verify the Install Location, and click [Install].

*If a message like the following is displayed, click [Continue].

The other currently running applications will exit, and installation will continue.

fig.d30

A dialog box will indicate Installation completed.

fig.d31

5.Click [Restart] to restart your Macintosh.

Setting the driver

■OMS settings

If other MIDI devices are connected, you must turn off the power on all devices, and then make OMS settings according to the following procedure.

1.Connect the GI-20 to your computer.

1)With the power switch turned OFF, connect the AC adaptor to the GI-20.

2)Connect the AC adaptor to an electrical outlet.

3)Use the USB cable to connect the GI-20 to your computer.

fig.d99

USB connector of your Computer

USB cable

GI-20

Computer

2.Switch ON the GI-20’s power switch.

3.In the “Opcode” folder in the location where OMS is installed, open the “OMS

Applications” folder, and double-click the “OMS Setup” icon.

fig.d33

If you are using the GI-20 with a sequencer, do not disconnect the MIDI cable connected to the GI-20 while a song is playing back.

* If the “Apple Talk” dialog box appears, click [Turn It Off]. Then, in the dialog box that appears next, click [OK].

fig.d34

60