Roland GI-20 owner manual Make sure that File signature verification is set to Ignore, Fig.d13

Installing & Setting Up the Driver (Windows)

■Windows 2000 users

1.With the GI-20 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

2.Log on to Windows as a user with administrative privileges (such as Administrator).

3.Open the “System Properties” dialog box.

1)Click the Windows Start button, and from the menu that appears, select “Settings Control Panel.”

2)In Control Panel, double-click the System icon.

fig.d13

4.Click the [Hardware] tab, and then click [Driver Signing].

Open the Driver Signing Options dialog box.

fig.d14

5.Make sure that “File signature verification” is set to “Ignore”.

If it is set to “Ignore”, simply click [OK]. If it is not set to “Ignore”, make a note of the current setting (“Warn” or “Block”). Then change the setting to “Ignore” and click [OK].

6.Click [OK] to close the “System Properties” dialog box.

7.Exit all currently running software (applications).

Also close any open windows. If you are using virus checking or similar software, be sure to exit it as well.

8.Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

9.Click the Windows Start button. From the menu that appears, select “Run...”.

fig.d15

If you changed the “File signature verification” setting in step 5, you must restore the previous setting after you have installed the driver.

→If you changed “File signature verification“ (p. 54)

51