Yes | ZyXEL Communications 1001H specs

P100IH ISDN Router

Figure 6-3 Sample IP Addresses for a TCPI/IP LAN-to-LAN Connection

To configure the TCP/IP parameters of a remote node, first configure the two fields in Menu 11 – Remote Node Profile, as shown in the table below.

Table 6-1 TCP/IP related fields in Remote Node Profile

Field	Description	Option

Rem IP Address	Enter the IP address of the remote gateway in Menu 11.1 -
	Remote Node Profile. You must fill in either the remote
	Prestige WAN IP address or the remote Prestige LAN IP
	address. This depends on the remote router’s WAN IP i.e., for
	the (remote) Prestige, the My WAN Addr settings in Menu 4.
	For example (see Figure 6-3), if the remote WAN IP is set to
	172.16.0.2 (the remote router’s WAN IP), then you should
	enter 172.16.0.2 in the Rem IP Address field. If the remote
	WAN IP is 0.0.0.0, then enter 192.168.1.1(the remote router’s
	LAN IP) in the Rem IP Address field).

Edit IP	Press the space bar to select Yes and press Enter to go to	Yes
	Menu 11.3 - Remote Node Network Layer Options menu.	(Yes/No)
		(Yes/No)

The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options.

Remote Node TCP/IP Configuration

6-3

Image 83

Contents

ZyXEL Page Trademarks ZyXEL Limited WarrantyCopyright Disclaimer Declarations Customer Support Iii Customer SupportPage Table of Contents 10-1 10.1 Table Of Contents Vii List Of Figures List of Figures 10 Editing The First Rule in a Set 11-4 15 HyperTerminal Screen 11-13 Successful Restoration 11-14 List Of Tables List of Tables List Of Tables Xiii Page Preface Ethernet Setup InformationPreface Internet Chapter Management & Maintenance ChaptersTroubleshooting Chapter Getting Started Chapters Getting to Know Your Isdn Router Features of the Prestige Clid Callback Support For Dial-In Users Extensive Analog Phone SupportIncoming Call Support Outgoing Data Call Bumping Support PAP and Chap Security Prestige Network Commander PNCFull Network Management Logging and Tracing Applications for Prestige 100IH Internet AccessUpgrade P100IH Firmware via LAN Supplementary Voice Features Internet Single User Account Remote Access ServerLAN-to-LAN Connection Telecommuting/Remote Access Server Application LED functions Hardware Installation & Initial SetupHardware Installation and Setup Front Panel LEDs of P100IH Prestige 100IH Rear Panel and Connections Prestige 100IH Rear Panel and Connections Connecting a Workstation to the Prestige Additional Installation Requirements Initial Screen Power On Your Prestige Operation Press/read Description Main Menu CommandsNavigating the SMT Interface Menu Title Description System Management Terminal Interface SummaryMain Menu Summary Filename conventions Changing the System Password Resetting the Prestige General Setup General Setup Menu Fields Isdn Setup MenusSupplementary Voice Services Setup Menus Pabx Outside Line Prefix MSN and SubaddressIncoming Call Routing Global Calls This field is fixed as DSS1or 1TR6 Menu 2 Isdn Setup Calling Line Indication Advanced SetupHow to use call waiting Isdn Call Waiting Isdn Advanced Setup Ethernet Setup 12 Menu 3.1 General Ethernet Setup General Ethernet Setup TCP/IP Parameters Internet AccessFactory Ethernet Defaults Internet Access Private IP Addresses RIP Setup DNS Server Address Dhcp ConfigurationIP Pool Setup Menu 3.2 TCP/IP and Dhcp Ethernet Setup TCP/IP Ethernet Setup and Dhcp Relay Dhcp Ethernet Setup Menu FieldsNone TCP/IP Ethernet Setup Menu Fields Internet Account Information Internet Access Configuration Field Description Internet Access Setup Menu Fields Used foe SUA only Page How NAT works IntroductionAdvantages of NAT How NAT Works NAT Mapping Types NAT Mapping Types NAT Application NAT Application SUA Single User Account Versus NAT Applying NAT in the SMT Menus NAT Setup In The Main MenuSMT Menus Translation Field Options Description Network Full FeatureApplying NAT in Menus 4 Address Address Mapping Sets and NAT Server Sets Configuring NAT Menu 15.1 Address Mapping Sets Server Field Description Options/Example Menu Ordering Your Rules 10 Editing The First Rule in a Set Menu 15.1.1.1 configuring an individual rule Multiple Servers Behind NAT NAT Server Sets 13 Menu 15.2 NAT Server Sets Configuring a Server behind NAT Examples Example 1 Internet Access OnlyServices & Port numbers 16 Internet Access & NAT Example Example 2 Internet Access with an Inside Server 18 Specifying an Inside Sever Example 3 General Case 19 NAT Example 20 Example 3 Menu 22 Example 3 Menu Example 4 Non NAT Friendly Application Programs 24 Example 4- Menu Page Minimum Toll Period Remote Node ConfigurationRemote Node Setup Remote Node Configuration Menu 11 Remote Node Setup Remote Node Profile Menu Fields Yes then EnableDisable 64k Leased Outgoing Authentication Protocol BTR v MTR for BOD PPP MultilinkBandwidth on Demand Menu 11.2 Remote Node PPP Options Editing PPP Options Remote Node PPP Options Menu Fields Menu 11.5 Remote Node Filter Remote Node FilterPage LAN-to-LAN Application Remote Node TCP/IP ConfigurationRemote Node TCP/IP Configuration Menu 11.3- Remote Node TCP/IP Options Remote Node Setup Menu 11.3 Remote Node Network Layer Options menu Yes/No TCP/IP related fields in Remote Node ProfileYes TCP/IP Remote Node Configuration Example of Static Routing Topology Static Route Setup Menu 12.1 IP Static Route Setup Edit IP Static Route Menu Fields Page Remote Dial-in Users Remote Nodes Dial-in Server ConfigurationRemote Dial-in Users/Remote Nodes Comparison Chart Dial-In Server Configuration Example of Telecommuting LAN-to-LAN Server Application Remote Access Server Clid Callback Support For Dial-In Users Default Dial-In Setup Required Default Dial-in Setup Fields 64/128 Dial-In IP Address Supplied By Dial-in User is set to Default Dial-in Filter Default Dial-in Filter Dial-In Users Setup Menu 14 Dial-in User Setup Optional Edit Dial-in User Menu FieldsActive Inactive Callback Clid Authentication Advanced Phone Services Advanced Phone ServicesSupplemental Services by region Flash Key Setting Up Supplemental Phone ServiceSupplemental Services by switch type Getting Started Three Way Calling How to use call waitingHow To Use Three Way Calling Call Waiting To Do a Blind Transfer How To Use Call TransferCall Transfer Call Forwarding Reminder Ring Phone Flash CommandsPage About Filtering Filter ConfigurationFilter Configuration Filter Set Filter Structure of the Prestige Menu 21 Filter Set Configuration Configuring a Filter Set Abbreviations Description Display Filter Rules Summary MenuAbbreviations Used in the Filter Rules Summary Menu Abbreviation Description Abbreviations Used If Filter Type Is IPAction Not Matched will be N/A Refers to Action Matched Refers to Action Not Matched Abbreviations Used If Filter Type Is GEN Configuring a Filter RuleFilter Types and NAT Protocol and Device Filter Sets 2 TCP/IP Filter Rule TCP/IP Filter Rule Menu Fields Menu 21.1.1 TCP/IP Filter Rule Action Matched None/Less/GreaterEqual/Not Equal Yes / N/A Field Description Option Forward Drop Executing an IP Filter Menu 21.1.2 Generic Filter Rule Generic Filter Rule Generic Filter Rule Menu Fields Ethernet traffic Applying a Filter and Factory Defaults 11 Filtering Remote Node traffic Remote Node Filters Telnet 10-1 Telnet Configuration and CapabilitiesAbout Telnet Configuration Telnet Under NAT Telnet Single AdministratorSystem Timeout Telnet Capabilities System Maintenance 11-1 System Maintenance System Status System Maintenance Status Menu FieldsSystem Maintenance ALU System Maintenance 11-3 LAN Packet That Triggered Last Call System Information Modified in Menu 1 General Setup System Maintenance 11-5 Console Port Speed Viewing Error LogLog and Trace Syslog And Accounting System Maintenance 11-7 Parameter Description System Maintenance Menu Syslog Parameters System Maintenance 11-9 Diagnostic System Maintenance Menu Diagnostic Display for a Successful Manual Call 10 Display for a Failed Authentication 11 Backup Configuration Backup Configuration System Maintenance 11-13 Restore Configuration Upload Router Firmware Firmware Upload System Maintenance 11-15 Uploading Router Configuration File Tftp Transfer System Maintenance 11-17 Boot module commandsExample Using the Walusoft Tftp client 21 Boot module commands Call Control Command Interpreter ModeSystem Maintenance 11-19 Call Control Parameters 23 Menu 24.9 System Maintenance Call Control Blacklist System Maintenance 11-21 26 Menu 24.9.3 Budget Management Budget Management Call History Time and Date SettingSystem Maintenance 11-23 28 System Maintenance Time and Date Setting System Maintenance 11-25 Time and Date Setting FieldsPage Call Scheduling Call Scheduling Schedule Set Setup Applying a Schedule Set Schedule Set Setup Fields Applying Schedule Sets to a Remote Node Troubleshooting TroubleshootingProblems Starting Up the Prestige Troubleshooting the Start-Up of your Prestige Troubleshooting the Isdn Line Problems With the Isdn Line Problems for Remote User to Dial-in Problems with the LAN InterfaceProblems Connecting to a Remote Node or ISP Page Acronyms and Abbreviations AppendixAcronyms and Abbreviations Trivial File Transfer Protocol Index Index NAT