Kyocera FS-5900C manual Check the error code Abnormal format. Try

Care and Maintenance

Error Message	Possible Cause	Corrective Action
RAM DISK error ##	Check the error code	01: Abnormal format. Try
Press CONTINUE	displayed in the place of	turning the power off and on
	## and refer to the	again.
	corresponding description	02: RAM DISK mode is OFF.
	at right.	Turn RAM DISK mode On.
		03: Cannot write to the disk
		system because it is write
		protected. Remove the write
		protection.
		04: No disk space. Clean up
		files.
		05: Specified file not on disk.
		06: No memory for use by disk
		system. Expand printer
		memory.
		10: Cannot format disk be-
		cause host data is spooled
		there. Format the disk after
		Ready is displayed.
		85: VMB: Alias error (Alias
		setting failure or no virtual bin
		corresponds to the alias.)
		Make the setting again.
		86: VMB: Password error (No
		password specification, mis-
		taken password, or password
		setting failure.)
		Check the password.
		87: VMB: Although an attempt
		was made to use a virtual bin
		job stack, the stack size
		reached the maximum limit.
		Output the job or raise the
		maximum limit.
		88: VMB: There was a job or
		page which could not be read
		out during virtual bin job
		output (the job is destroyed).
		89: VMB: No job in the virtual
		bin specified for output or that
		virtual bin is not being used.
		Check the bin.
		97: MPS: A non-volatile job
		has reached the maximum
		limit and no more data can be
		saved. Clean up the job or
		raise the maximum limit.
		98: MPS: There was a page
		which could not be read out
		within a job (the job is de-
		stroyed).

97