Kyocera FS-5900C manual Yellow toner develop Install the yellow toner

Care and Maintenance

Error Message		Possible Cause	Corrective Action
Missing Toner		The yellow toner develop-	Install the yellow toner
TD-81Y (Yellow)		er is not installed in the	developer (☞P. 14).
		printer.
Missing paper		The paper feeder unit is	Install the paper feeder unit.
feed unit		not installed in the
		printer.
Option feeder		The paper feeder’s left	Close it tightly.
Left cover Open		side cover is open.
Opt. ROM error		The printer has encoun-	Press CONTINUE to print the
Press CONTINUE		tered an error while	data processed so far. Replace
		accessing data in the	the option EPROM.
		option EPROM (on the
		printer main board).
Option interface		The printer has detected	Note the error code of ## and
Error	##	an error on the option	consult your Kyocera dealer.
		interface.
Output tray		The output tray has	Remove paper from the output
paper full		become full.	tray.
PJL OPMSG/STMSG		The printer encountered	Press CONTINUE to print the
		an error during process-	page processed so far.
		ing PJL commands.
Paper jam		Paper has become	Remove jammed paper accord-
(Location)		jammed.	ing to section Removing Paper
			Jam (☞P. 71).
Print overrun		The printer has received	Press CONTINUE to print the
Press CONTINUE		print data that is too	data. Install additional
		complex to finish process-	memory .
		ing in time with the
		operation of the printer
		mechanism.
Processing		Compressed data is	Increase the printer memory
PAR FIT A4		printed due to insufficient	to avoid this error.
		memory when FIT flashes
		in the resolution indica-
		tor. The quality of printed
		data is reduced when this
		occurs. Fit will continue
		flashing even after
		printing is finished. The
		resolution indicator will
		automatically return to
		the previous resolution
		when any key is pressed,
		when a timeout occurs, or
		when subsequent data is
		received.

96