Setup
2 Compare the current colour density settings on the Colour Calibration Page with the colour density samples on the Colour Calibration Reference to see if they match.
Place the Colour Calibration Page on at least 2 sheets of clean white paper in a
10 10 10 10
Colour Calibration
Page
Colour Calibration
Reference
If they match, you do not need to adjust the colour density. If they do not match, go to step 3.
3 Press the + key until the message display shows >Cyan. The current density setting for cyan is indicated (the default is 10).
(1)Press the ENTER key.
>Cyan
10
(2)Press the + or - key to darken or lighten the cyan colour.
For example:
•If you wish to make the density setting darker:
–Press the + button (up to 20).
•If you wish to make the density setting lighter:
–Press the - button (to 00).
(3)Press the ENTER key.
32
