Care and Maintenance

2 (1) Hold the fuser as shown below, and slide it out of the printer.

Safety Caution:

The fuser unit weighs approximately 3.1 kg (6.8 lbs.). Take care when handling it.

(2)Close the front cover.

(2)

3 Remove the oil supply roll:

(1)

(1)Press out on tabs to unlock the oil supply roll.

(2)Remove the oil supply roll out of the fuser.

(1)

(2)

(1)

Note:

Do not turn the green handle before removing the oil supply roll.

If the paper is not jammed in the fuser unit, perform the following.

(1) Repeat steps 1 to 4 of Jam B on page 73.

(2) Skip step 4 and go to step 5.

75

Page 88
Image 88
Kyocera FS-5900C manual Care and Maintenance