Care and Maintenance
| Trouble | Possible Cause | Corrective Action | |
|
|
|
|
|
The page is completely | The problem could be with | Turn the printer off and back | ||
blank. | one of the following: | on again. If the problem | ||
|
|
| • Engine control board. | persists, call for service on |
|
|
| ||
|
|
| • Developer voltage. | your printer. |
|
|
| • Laser scanning unit mirror. |
|
|
|
|
|
|
|
|
| ||
“Call service person ...” | An error occurred that is not | Turn the printer off and back | ||
is displayed on the | on again. If the error per- | |||
message display. |
| sists, call for service. | ||
|
|
|
|
|
■If you can’t make a print
Trouble | Possible Cause | |
|
| |
The printer does not | Make sure that you plugged in the printer and turned it on. | |
operate. |
| |
Make sure that you connected the interface cable(s) properly. | ||
| ||
|
| |
The printer does not | If the communication link between your computer and the | |
print. | printer is working but the printer ejects a blank page when | |
| printing from your application or through Windows, make | |
| sure that the appropriate driver is installed and that you | |
| have selected the printer correctly. | |
|
|
Trouble | Possible Cause |
| Corrective Action |
|
|
| |
The printer does not | The computer is not properly | Follow the procedure below | |
print correctly. | communicating with the | and disable the | |
| printer. | interface. | |
|
| Under Windows 95/98: | |
|
| 1. | Click Start, select Set- |
|
|
| tings, then click Printers. |
|
| 2. | Double click the Kyocera |
|
|
| |
|
| 3. | Click the Printer menu, |
|
|
| then click Properties. |
|
| 4. | Click the Details tab and |
|
|
| Spool settings... . |
|
| 5. | Click Disable |
|
|
| tional support for this |
|
|
| printer, then click OK. |
|
|
|
|
90
