
Before You Start
■CD-ROM
To prevent the
•Do not touch or write on the surface of the disc.
•Do not leave the disc out of the protective case.
•Do not leave the disc in direct sunlight or near heat sources.
•Do not place heavy objects on the disc.
•To clean the disc, hold the disc by its edges and wipe it from the centre to the edges with a dry, soft cloth.
■Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface, such as the printer’s bare metal frame prior to touching the component.
•The interface connectors: Parallel and optional network card
•Electrical components, connectors inside the printer and any components on the optional boards (RAM expansion board, network interface board, etc.)
•The connector pins on the optional paper feeder for the printer
■Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
■Waste Disposal Method
Waste material may be dumped or incinerated under conditions which meet the applicable environmental regulations.
2