Care and Maintenance
3 Use a dry, lint-free cloth to wipe the slot of the sensor.
Sensor
Slot
4
5
Reinsert the imaging unit into the printer, holding it by its green handles.
Match the arrow on the right side of the imaging unit with the arrow on the printer, and slightly push the imaging unit into the printer. Then release the left handle and push the unit in until it stops.
(1)Turn the lower green lever clockwise 180° to insert the unit completely and to lock it.
(2)Tighten the two green thumbscrews by turning them clockwise.
(3)Close the front cover.
(2) |
(2)
(1)
(3)
68
