Kyocera FS-5900C manual Imaging unit is not Lift the imaging unit lever

Care and Maintenance

Error Message	Possible Cause	Corrective Action
I/F occupied	The front control panel	Wait until the data transfer is
	operation you attempted	completed on that interface.
	is not possible because
	that interface is receiving
	data.
Imaging unit	The imaging unit is not	Lift the imaging unit lever
not locked	locked properly because	fully up.
	its lever is not lifted.
Insert the same	A different memory card	Reinsert the same memory
MEMORY CARD	was inserted following the	card as was removed previous-
	MEMORY CARD err/	ly into the printer’s memory
	Insert again message.	card slot.
KPDL Error ##	The printer encountered	Note the error code of ## and
Press CONTINUE	an error during process-	press CONTINUE to clear the
	ing data in KPDL mode.	error situation. See section
		KPDL Error Codes (☞P. 100)
		for information.
Left cover Open	The left side cover is open.	Close it tightly.
Load (paper source)	The paper size or type	One of MP tray, Cassette 1
(paper size)(media type)	does not match the	to 3, will be displayed in
	printing area.	place of "paper source". Load
		the paper displayed on the
		message display and press the
		CONTINUE key to print.
		Or, pressing the FEED key
		without pressing the CONTIN-
		UE key, will cause Use al-
		ternative? to be displayed,
		and a different paper source
		can be selected to supply
		paper. The paper source
		changes each time the FEED
		key is pressed. And press the
		MODE key to display Paper
		handling>. Press the key
		and you can change the paper
		source setting using the + or -
		key to select. Load paper
		appropriate for the paper
		source and press the EXIT key
		to print.

94