Using the Printer
Permanent
In this mode, the printer stores fonts, macros, symbol sets, etc. in memory that were downloaded as permanent PCL resources. All temporary resources are lost when the emulation mode is changed from PCL 5C to KPDL or vice versa.
Permanent and temporary
In this mode, the printer stores both permanent and temporary resources when the emulation mode is changed from PCL 5C to another or vice versa.
To select the resource protection mode:
1 | Press the MODE key on the printer panel. |
2 | Press the + key repeatedly until the message display indicates |
| Others>. |
3 | Press the key. |
4 | Press the + key repeatedly until the message display indicates |
| >Resource prot. |
The current resource protection mode is indicated — Permanent or Perm/Temp.
5
6
7
8
>Resource prot. |
| >Resource | prot. |
Permanent |
| Perm / | Temp |
|
|
|
|
Press the ENTER key. The question mark (?) will appear blinking.
Press the + key to change from Permanent to Perm/Temp, or vice versa.
Press the ENTER key to finalize the setting.
Press the MODE key to exit the mode selection menu.
63
