ZyXEL Communications 1001H manual Menu 2 Isdn Setup, This field is fixed as DSS1or 1TR6

P100IH ISDN Router

isdn initstring set AT&ZOx=number

where x is 'I' for ISDN data calls, 'A' for A/B Adapter 1 and 'B' for A/B Adapter 2. For instance,

isdn initstring set AT&ZOI=100&ZOA=101&ZOB=102

sets the calling party number to 100 for ISDN data calls, 101 for A/B adapter 1 and 102 for A/B adapter 2.

	Menu 2 - ISDN Setup
Switch Type: DSS-1(Taiwan)
B Channel Usage= Switch/Switch
ISDN Data	=	Subaddress=
A/B Adapter 1	=	Subaddress=
A/B Adapter 2	=	Subaddress=
A/B Adapter 2	Accepts Modem Call= Disable

PABX Outside Line Prefix =

Outgoing Calling party Number =

Incoming Phone Number Matching= Multiple Subscriber Number (MSN)

Analog Call Routing= N/A

Global Analog Call= N/A

Edit Advanced Setup = No

Press ENTER to Confirm or ESC to Cancel:

		Figure 2-8 Menu 2 – ISDN Setup for DSS1
			Table 2-5 Menu 2 – ISDN Setup
	Switch Type		This field is fixed as DSS1or 1TR6.
	B Channel Usage		In general, this is Switch/Switch. If you are only using one B channel
			(e.g., your Prestige is sharing the ISDN BRI line with another device
			on the S/T bus), then select Switch/Unused. The default is
			Switch/Switch. The options for this field are:
			♦		♦
				Switch/Switch		Leased/Unused ♦ Switch/Unused
			♦	Switch/Lease	♦	Unused/Leased
			♦	Leased/Switch	♦	Leased/Leased
	ISDN Data &		Enter the telephone number and the subaddress assigned to ISDN
	Subaddress		data calls for the Prestige. The maximum number of digits is 25 for the
			telephone number and 5 for the subaddress.
	A/B Adapter 1 &		Enter the telephone number and the subaddress assigned to A/B
	Subaddress		Adapter 1 (PHONE1).
	A/B Adapter 2 &		Same as above for A/B Adapter 2 (PHONE2).
	Subaddress
Hardware Installation and Setup						2-11