Barco 26-0313000-00 manual RS232 Setup, RS-232 Setup Menu sample

5. Menu Orientation

System Menu

•Press {NEXT IP QUAD} to advance to the next 3-digit set of numbers in the address. Use the ADJ knob in the normal manner to change the digits.

•Press {TEST COMM} to test communications with the defined router:

~If the test is successful, a “ROUTER CONNECTED” message will appear that includes the Router name and version.

~If the test is unsuccessful, a “ROUTER FAILED” message will appear. In this condition, re-check all connections and settings, and repeat the test.

RS-232 Setup Menu

On the Router Specification Menu, when Communication Type is set to RS-232, press {COMM SETUP} to display the RS-232 Setup Menu:

	RS232 SETUP
B	Baud Rate	115200
A			N
C			A
K
	Data Bits	[ 8 ]	V
	Parity	[ NONE ]
	Stop Bits	[ 1 ]
			A
			D
			J
	TEST
	COMM
Figure 5-38.RS-232 Setup Menu (sample)

The RS-232 Setup Menu enables you to set the router’s RS-232 baud rate only. All other parameters are fixed.

•Baud Rate — sets the desired baud rate (9600, 14400, 19200, 28800, 38400, 57600, 115200).

•Data Bits — fixed at 8.

•Parity — fixed at None.

•Stop Bits — fixed at 1.

•Press {TEST COMM} to test communications with the defined router:

~If the test is successful, a “ROUTER CONNECTED” message will appear that includes the Router name and version.

~If the test is unsuccessful, a “ROUTER FAILED” message will appear. In this condition, re-check all connections and settings, and repeat the test.

192 Encore Presentation System • User’s Guide • Rev 04