Encore Presentation System • User’s Guide • Rev 04 221
5. Menu Orientation
PIP Adjustment Menu
Invert — enables you to invert all image colors.
Hue — adjusts the image’s hue, by rotating color vectors throughout the 360
degree color spectrum.
Mode — In the “Strobe” section, enables or disables the strobe mode which when
enabled, acts as a programmable freeze.
Interval (frames) — In the “Strobe” section, sets the freeze interval.
Press {RESET RGB} to reset all image colors to their default values.
Press {PIP} to return to the PIP Adjustment Menu. Refer to the “PIP
Adjustment Menu Functions” section on page214 for details.
Press {BORDR} to display the Border Menu. Refer to the “Border Menu
section on page 218 for details.
Press {SHDOW} to display the Shadow Menu. Refer to the “Shadow Menu
section on page 219 for details.
Press {CLONE} to display the Clone Setup Menu (if Clone is enabled). Refer to
the “Clone Setup Menu” section on page216 for details.
Note To remove any image effects from the PIP or Key, press the
RESET button in the Layer Functions Section. No other
parameters will be affected.