Barco 26-0313000-00 manual Encore Presentation System User’s Guide Rev 217

5. Menu Orientation

PIP Adjustment Menu

~Offset — both cloned images move together with a fixed pixel offset. For example, if you adjust H Position, both images move left and right. If you adjust V Position, both images move up and down.

PIP A

Cloned

PIP A

Figure 5-60.Clone Offset Mode — Sample Widescreen

~Mirror — both cloned images move together as if a mirror is positioned in the middle of the widescreen overlap region. For example, if you adjust H Position, both images move towards (and away from) the center of the widescreen.

PIP A

Cloned

PIP A

Figure 5-61.Clone Mirror Mode — Sample Widescreen

•Offset — if “Offset” is selected on the Clone Type line, this field enables you to set the offset (in pixels). If “Mirror” is selected, the field is hidden.

Important

The Clone Setup Menu also appears when the Clone button is enabled (in the Layer Functions Section), provided that a widescreen destination is selected. However, if you press Clone and the message “Resource Conflict - Cannot Apply Clone” appears, the PIP (or Key) is most likely positioned within the center of the widescreen.

SIn a 2 screen blend, the PIP or Key cannot be positioned such that it sits between screens 1 and 2.

SIn a 3 screen blend, the PIP or Key cannot be anywhere within the screen 2 space.

In Chapter 7, refer to the “Using Clone” section on page 330 for operating instructions.

Encore Presentation System • User’s Guide • Rev 04 217