Barco 26-0313000-00 manual `äçåÉ=pÉíìé=jÉåì, Clone Setup, Offset

5. Menu Orientation

PIP Adjustment Menu

`äçåÉ=pÉíìé=jÉåì

From the PIP Adjustment Menu, press {CLONE} to display the Clone Setup Menu, a sample of which is shown below.

Note

If the cloned layer is a key (and accessed from a Key menu), softkeys will be different: {PIP} is replaced by {KEY}, and {BORDR} and {SHDOW} will not be shown.

		CLONE SETUP
P	Destination	1	N
I
P	Clone Type	OFFSET	A
			V
B	Offset	704
O
R
D
R			A
			D
S			J
H
D
O
W
E
F
X

Figure 5-59.Clone Setup Menu (sample)

The Clone Setup Menu enables you to set parameters for a cloned layer.

Note

You can access the Clone Menu from the Shadow Menu, the Border Menu and the Image Effects Menu by pressing {CLONE} — provided that the Clone button is enabled.

Please note:

•The {CLONE} softkey only appears when a PIP (or Key) is cloned and the Clone button is lit.

•The mode can only be enabled when a widescreen destination is selected.

•The mode cannot be enabled if the PIP or Key straddles any part of the center of the overall widescreen. An error message “Resource Conflict - Cannot Apply Clone” will appear.

•Both PIPs and Keys can be cloned.

•You can set up and perform Moves with clones.

The following functions are provided:

•Destination — displays the currently selected destination.

•Clone Type — sets the type of clone “motion.”

216 Encore Presentation System • User’s Guide • Rev 04