Barco 26-0313000-00 manual MêçÖê~ã=lìíéìí=kçíÉë, ~äçÖ=fåéìí=cäÉñáÄáäáíó, Yuv Rgb

2. Hardware Orientation

Program Output Notes

mêçÖê~ã=lìíéìí=kçíÉë

For both VP and VPx units, please note the following important points regarding the Processor’s program outputs:

•HD/SDI Outputs — For the HD/SDI output, you can set the output to be SDI (SMPTE 259M-C, NTSC or PAL) or HD-SDI(SMPTE 292M, HDTV). When you set this output resolutions, all output connectors will output that same resolution.

•DVI Program Outputs — DVI Program outputs are digital only. They do not have analog connections.

•Program 1 Outputs — Edge feathering and data doubling are present on all Program 1 Outputs, provided that those features are enabled in the system’s Output Menu.

^å~äçÖ=fåéìí=cäÉñáÄáäáíó

For VPs only, each M/E’s Analog Input connectors (A and B) accept a variety of analog formats including VGA, low-resolution composite, S-video and YUV component video.

•For RGB with H and V sync, use the VGA connector directly.

•Using a (customer supplied) VGA to 5xBNC breakout cable, five input combinations are possible. Cells with check marks denote the connections required for the indicated format.

Table 2-1.Analog Input Combinations using Breakout Cable

Breakout Cable	Composite	S-Video			YUV	RGB	RGB	RGB
Wire Color	Video		(Y/C)	(YPbPr)		Sync on Green	Comp Sync	Separate H V
R		3	(Chrom)	3	(Pr)	3	3	3
G	3	3	(Lum)	3	(Lum)	3	3	3
B				3	(Pb)	3	3	3
H Sync							3	3
V Sync								3

Encore Presentation System • User’s Guide • Rev 04 57