Barco 26-0313000-00 manual QçìÅÜ=pÅêÉÉå=pÉÅíáçå, Softkeys, Rotary Knobs

4. Controller Orientation

Controller Sections

qçìÅÜ=pÅêÉÉå=pÉÅíáçå

The figure below illustrates the Touch Screen Section, which is identical on both Controller models. The model LC has two Touch Screen sections, while the model SC has one. A sample menu is shown below.

			PIP ADJUSTMENT
							S
		H Size ( 34.6%)			788		I
							Z
		V Size (68.8%)			528		E
B
O		H Position			-98
R
D
E		V Position			30
R							H
S							P
							O
H							S
A
D		Move Rate			2.0
O
W		Key Frame Effect			[ N/A ]
E		OPERATION:					V
F							P
X		JOY Z TO SIZE, X Y TO POSITION
							O
							S
	TRACK		H SIZE	V SIZE		RATE

1	3	2
	Figure 4-3.Touch Screen Section

1)Softkeys

2)Rotary Knobs

3)Touch Screen

Following are descriptions of each area:

1)Softkeys

Eight un-labeled softkeys are provided — four to the left of the Touch Screen and four below. Softkey labels (when present) appear on the Touch Screen itself. Press the adjacent softkey to access the menu or activate the indicated function.

2)Rotary Knobs

Three Rotary Knobs are provided to the right of the Touch Screen. Each knob controls (or adjusts) the function that is labeled on the Touch Screen itself, immediately adjacent to the knob. Please note:

~The Top Knob is generally assigned to navigating menu fields. For example, turning the knob moves a highlight up and down a list of parameters, allowing you to adjust the highlighted function. This knob also adjusts adjacent parameters.

~The Middle and Bottom knobs are generally assigned to adjusting the adjacent parameters, as labeled on the Touch Screen.

Encore Presentation System • User’s Guide • Rev 04 115