260 Encore Presentation System • User’s Guide • Rev 04
6. System Setup
Setup Prerequisites
pÉíìé=mêÉêÉèìáëáíÉë
Before starting to set up your Encore system, please review the following prerequisites:
Ensure that you are familiar with all Encore system hardware. Refer to Chapter2,
Hardware Orientation” on page43 for details.
Ensure that hardware is properly installed, and that all sources, routers and
peripherals are properly connected. Refer to Chapter 3, “Hardware Installation
on page61 for details.
Ensure that you are familiar will all parts of the Controller — including the
functions of all buttons within the various sections. Refer to Chapter 4,
Controller Orientation” on page107 for details.
Ensure that you are familiar will all Encore menus and sub-menus. Refer to
Chapter 5, “Menu Orientation” on page145 for details.
Ensure that your connection charts are complete, and readily available for
reference throughout this chapter. In Chapter3, refe r to the “Connection Charts
section on page 89 for details.
Please note:
In this chapter, when a procedure tells you to “scroll to” a certain line, use the
rotary knob labelled NAV to move the highlight.
When a procedure tells you to “adjust” or “select” a certain parameter, use the
ADJ rotary knob.
Figure 6-1. Menu Navigation
1.0
HD-15
YPbPr
[ SMPTE ]
[ 1:1 ]
N
A
V
A
D
J
SRC_1
COLOR
BALANCE FORCE
ACQUIRE
100.0
100.0