Barco 26-0313000-00 manual AUX Setup DEST2, MATRIXPRO1

5. Menu Orientation

System Menu

•Press {REMOVE} to remove the selected VP, VPx or ScreenPRO-II (on the VP [SP] to Remove line) from the current destination configuration.

•Press {REMOVE ALL} to remove all units from the current destination.

Note

If you have defined a destination as a Wide Screen, preliminary wide screen setup information will be sent to the VP and VPx units when you exit this menu.

Aux Setup Menu

From the Destination Setup Menu, select an Aux destination type, then press {AUX SETUP} to display the Aux Setup Menu. Please note:

•The {AUX SETUP} button appears when an Aux, ImagePRO Aux or PrePRO-II Aux destination is selected on the Destination Setup Menu.

•The Aux Setup Menu changes, depending upon the selected type of destination.

•In Chapter 1, refer to the “A Word About Destinations” section on page 27 for examples of each Aux destination “type.”

When a standard Aux destination “type” is selected on the Destination Setup Menu, the Aux Setup Menu appears in this form:

	AUX SETUP	DEST_2
B	Source Mapping	Direct Map	N
A			A
C			V
K	Router Name	MATRIXPRO1
	Router Output	7
			A
			D
			J
		RESET
Figure 5-32.Aux Setup Menu — Aux Destination (sample)

The following functions are provided:

•Top Line — displays the type of Aux destination and its number.

•Source Mapping — two selections are available:

~Input Patch — maps Aux sources according to how your inputs are patched to buttons in the console’s Source Selection section.

~Direct Map — maps Aux sources according to how your inputs are connected to the router.

•Router Name — selects the router from which the Aux sources will be output.

184 Encore Presentation System • User’s Guide • Rev 04