Barco 26-0313000-00 manual Shuffle, Encore Presentation System User’s Guide Rev 143

Swap

Toggle

Move

Shuffle

Ext

Trigger

Black

Preview

4. Controller Orientation

Controller Sections

Swap — in “Mix Mode” for a given layer (with the Split button off), press Swap to allow both PIPs in the mixer to be located independently.

•Layers A and B can be positioned and sized anywhere as desired.

•Mix Source and Swap modes are mutually exclusive.

In Chapter 7, refer to the “Understanding Split and Mix Modes” section on page 321 for complete instructions.

Toggle — press to toggle sources back and forth with each transition. Once a source transitions off of Program within a PIP, it “flip-flops” to Preview.

•Toggle is used with both the Mix Source and Swap modes, and also functions with background transitions.

In Chapter 7, refer to the “Understanding Split and Mix Modes” section on page 321 for details on the Toggle mode.

Move — press to pend a “move” for a PIP or key, enabling you to fly the PIP or key from one location to another on the next auto transition. In Chapter 7, refer to the “Using Move” section on page 336 for complete instructions.

Shuffle —

Note The Shuffle function is currently not implemented.

Ext Trigger — This function is only used with the Barco Events Manager or Barco Stage Manager applications. With these two products, operators can pause the timeline which in turn causes the Ext Trigger button to flash. Pressing Ext Trigger starts the timeline again. In Chapter 7, refer to the “Using Ext Trigger” section on page 333 for details.

Black Preview — This function enables you to transition all layers, backgrounds and the DSK to black, across all configured screens and all enabled destinations. The button is a toggle — press to enable black on Preview, press again to restore the previous “look.” In Chapter 7, refer to the “Using Black Preview” section on page 332 for details.

Encore Presentation System • User’s Guide • Rev 04 143