Barco 26-0313000-00 manual RëÉê=mêÉÑÉêÉåÅÉ=jÉåì, User Preference Menu

5. Menu Orientation

Miscellaneous Menu

rëÉê=mêÉÑÉêÉåÅÉ=jÉåì

From the Miscellaneous Menu, press {USER PREF} to display the User Preference Menu:

	USER PREFERENCE MENU
B	Black Invalid Video	On	N
			A
A			V
C	Auto Source Acquire	On
K
	Auto Input Save	On
	Events Manager Support	Off
	Mix Key		A
			D
	Trans Type	[ Mix ]	J
	Trans Rate	1.0
	Trans Edge Width	[ N/A ]
	User Effect

Figure 5-49.User Preference Menu (sample)

The User Preference Menu enables you to set a variety of user parameters. The following functions are provided:

•Black Invalid Video — selects the method by which the scaler’s “loading” procedure is shown on Preview, when you change inputs:

~ON — shows black when scalers are loaded. In addition, black is shown when a background channel (BG) becomes invalid, and the DSK will be turned off when source video becomes invalid.

~OFF — shows the full scaler loading procedure, which can temporarily include non-sync and non-stable video.

•Auto Source Acquire — selects whether or not the Controller automatically acquires an input, as soon as the source is selected on the bus — provided it does not currently have a saved input configuration file.

•Auto Input Save — selects whether or not the Controller automatically saves an input configuration file, as soon as the source has been successfully acquired. The Auto Source Acquire function must be enabled.

•Events Manager Support — This function assists with Preset recall performance, when large numbers of Presets are being used. In this condition, set the field to OFF (the default setting). If Events Manager support is required, enable the field before connecting the Controller to the Events Manager software.

•Mix Key — applies to the Mix button on both controllers. On the menu, the Trans Rate field below this heading allows you to select a custom transition rate with the Mix button. When Mix is pressed on the controller, the “custom” transition rate is applied, and the transition type (if currently different) is changed to a mix. Note that the Trans Type and Trans Edge Width fields are grayed out, because you can only perform a mix with the Mix button.

•User Effect — applies to the User Effect button on the small controller. On the menu, the three fields below this heading allow you to program a custom

204 Encore Presentation System • User’s Guide • Rev 04